Water Bills Information 2026: A Complete Guide for Pakistani Households
Water Bills Information 2026: Everything you need to know about WASA water bills in 2026 — how charges are calculated, […]
Water Bills
ALL 11 DISCOS · FREE · NO LOGIN NEEDED
Check Electricity Bills Online Pakistan
Instantly check duplicate electricity bills for MEPCO, LESCO, FESCO, IESCO, GEPCO, HESCO, PESCO, QESCO, SEPCO, TESCO, HAZECO, and K-Electric (KE). View, download, and print your bill using your reference number or customer ID.
MEPCOLESCOFESCOIESCOGEPCO
HESCOPESCOQESCOSEPCOTESCO
HAZECOK-ELECTRIC
✓ Official billing data
⚡ 100% free
📱 Mobile friendly
🔒 No account required
Check Your Bill Now
Select your distribution company to begin
Distribution Company
Please enter a valid reference number to continue.
Opens your DISCO's official PITC bill portal in a new tab.
MEPCO Service Coverage: A Detailed Overview
The Multan Electric Power Company, widely known by its acronym MEPCO, stands as the largest electricity distribution company (DISCO) in Pakistan in terms of geographical coverage. Headquartered in the city of Multan, MEPCO supplies electricity to thirteen administrative districts across South Punjab, a region that includes Multan, Bahawalpur, Bahawalnagar, Rahim Yar Khan, Dera Ghazi Khan, Rajanpur, Muzaffargarh, Layyah, Vehari, Khanewal, Sahiwal, Pakpattan, and Lodhran. Multan itself serves not only as the company’s administrative headquarters but also as the commercial and logistical hub of the entire South Punjab region.
Historical Background
MEPCO’s roots trace back to 1922, when it operated under British colonial rule as the Multan Power Supply Company. Following independence, the company underwent nationalization in 1972 and came under the direct control of the Government of Pakistan. Interestingly, the company was once publicly listed on the Karachi Stock Exchange, though it was delisted in 1985. The modern incarnation of MEPCO came into existence on 14 May 1998, when the Government of Pakistan initiated the corporatization of the national energy sector. As part of this restructuring, MEPCO was established to take over all properties, rights, assets, obligations, and liabilities of the former Multan Area Electricity Board, along with its grid stations and transmission infrastructure.
Scale and Reach
Today, MEPCO serves somewhere between 7 and 7.5 million registered consumers, with the broader population benefiting from its services estimated at around 34 to 35 million people. In terms of sheer geography, MEPCO’s operational territory spans approximately 97,358 square kilometers, making it the single largest distribution company in the country by area covered. This vast territory is far larger than that of most other DISCOs operating in Pakistan, which is a direct consequence of South Punjab’s expansive and largely rural landscape.
To manage a network of this scale, MEPCO has organized its operations into a hierarchical structure consisting of 9 operational circles, 38 divisions, and 181 subdivisions. Each circle oversees a cluster of divisions, and each division in turn manages several subdivisions, allowing the company to maintain localized oversight of grid stations, feeders, and consumer services across such a wide and diverse territory. This layered administrative model helps MEPCO handle everything from routine maintenance to fault reporting and new connection requests at a manageable, localized level.
Infrastructure
MEPCO’s physical infrastructure reflects the scale of its coverage area. The company operates more than 150 grid stations, with a combined transformation capacity of roughly 7,500 MVA (megavolt-amperes). Its transmission and distribution network extends across tens of thousands of kilometers of lines — estimates place the figure between 66,000 and 82,000 kilometers depending on the source and year of measurement — supported by over 2,000 feeders that carry electricity from grid stations to the doorsteps of consumers. This extensive network is a continual work in progress, with MEPCO periodically adding new grid stations, transformers, and feeders to reduce voltage drops, tripping complaints, and unplanned outages, particularly in high-demand agricultural belts.
A Unique Geographic Position
One of the most distinctive aspects of MEPCO’s service territory is that it is the only Pakistani DISCO whose boundaries touch three different provinces and border five other distribution companies. Near Sadiqabad, MEPCO’s territory meets HESCO, which serves Sindh province. Close to Vahova, it borders PESCO, the distribution company for Khyber Pakhtunkhwa. Near Fort Munro, MEPCO’s territory touches QESCO’s jurisdiction in Balochistan. It also shares boundaries with FESCO near Bhakkar and with LESCO near Sahiwal. Adding to this geographic significance, MEPCO’s territory in the Minchinabad area of Bahawalnagar district actually extends to the international border with India. This combination of provincial and international boundary contact is unmatched by any other DISCO in the country.
Consumer Profile
Because MEPCO’s coverage area is predominantly rural and agricultural in character, its consumer base skews heavily toward domestic and lifeline (low-consumption) users, along with a substantial number of agricultural tube-well connections. Unlike more urbanized DISCOs such as LESCO or IESCO, which serve dense city populations with a higher proportion of commercial and industrial connections, MEPCO’s network must accommodate scattered rural feeders spread across vast farmland, which presents unique challenges in terms of line losses, maintenance costs, and outage management. The company categorizes its consumers into four broad groups — domestic, commercial, industrial, and agricultural — each billed according to tariff structures set by the National Electric Power Regulatory Authority (NEPRA).
Consumer Services
To make life easier for its millions of consumers, MEPCO has invested in a range of digital and remote-access services. These include online bill checking through the official PITC (Power Information Technology Company) portal, duplicate bill downloads, SMS-based bill inquiries, and an online complaint registration system. Complaints related to billing errors, low voltage, tripping, or unscheduled load shedding can be tracked through the Customer Complaint Management System (CCMS), which is shared across multiple DISCOs including MEPCO. The company also supports net metering for consumers who have installed solar panels, allowing surplus electricity generated at home to be fed back into the grid in exchange for billing credits — a service that has grown increasingly popular given Pakistan’s rising interest in renewable energy and rising conventional electricity costs.
Conclusion
In summary, MEPCO occupies a singular position within Pakistan’s power distribution landscape. It is not only the largest DISCO by geographical area but also one of the most administratively complex, given its nine circles, dozens of divisions, and nearly two hundred subdivisions spread across thirteen districts of South Punjab. Its unique position bordering three provinces and one foreign country, combined with a predominantly rural and agricultural consumer base, sets it apart from the more urban-focused distribution companies elsewhere in the country. For millions of residents across South Punjab, MEPCO is not just a utility provider but a critical piece of infrastructure underpinning agriculture, industry, and daily life across one of Pakistan’s largest and most populous regions.
All Discos
MEPCO-LESCO-FESCO IESCO-GEPCO-HESCO
PESCO-QESCO-SEPCO
TESCO-HAZECO
K-Electric.
Trust & Transparency
Clear, honest, and easy to understand
We give you access to the same official bill data used by millions of consumers, while making it clear who manages your electricity account (your DISCO) and who operates this website (us).
Official Bill Information
Every duplicate bill is fetched from the official centralized billing platform. We never generate or alter bill amounts, tariff calculations, or due dates—only the official data is shown for your reference.
Simple Access, No Hassle
Forget passwords and paid subscriptions. With your printed reference number, you can retrieve your bill in just a few seconds from any internet connection.
Learn While You Check
Helpful guides on FPAs, tariff slabs, and payment processes are available alongside the bill checker, making it easier to understand your bill—not just view it.
Yahan MEPCO ke peak hours ki general table hai. Note: yeh timings season ke hisab se thori vary ho sakti hain, aur exact timing sirf official MEPCO/NEPRA notification ya aapke TOU meter tariff se confirm honi chahiye.
| Season | Peak Hours | Off-Peak Hours |
|---|---|---|
| Summer (June–August) | 6:00 PM – 10:00 PM (kahin kahin 7 PM – 11 PM bhi report hui hai) | Raat 11 PM se subah tak |
| Winter (December–February) | 5:00 PM – 9:00 PM | Din/raat ke baqi hours |
| General/All-week | 6 PM – 10 PM (sabse zyada quoted window) | Baaki poora din |
Extra points jo useful hain:
- Yeh peak hours har din (Monday se Sunday tak, including holidays) apply hoti hain.
- Peak hours mein per-unit rate off-peak se kaafi zyada hota hai (kuch sources ke mutabiq roughly double).
- Yeh schedule sirf TOU (Time of Use) ya TOD meter walon ke liye directly relevant hai — agar aapka simple meter hai to slab-based tariff apply hoga, peak/off-peak nahi.
Chunke yeh sab third-party/blog sources se hai (official MEPCO announcement nahi mila mujhe search mein), best hoga ke aap apna exact bill ya MEPCO ka official portal/customer service (118 helpline) check kar lein confirm timing ke liye.
MEPCO Net Metering Policy & Net Billing (2026 Update)
A complete guide for MEPCO (Multan Electric Power Company) solar consumers on the new NEPRA regulations, eligibility, application process, and rates.
What Changed in 2026?
On February 9, 2026, NEPRA officially notified the Prosumer Regulations 2026, replacing the older Net Metering Regulations 2015. This introduced a new Net Billing mechanism for new solar applicants, while existing net metering consumers retain their old terms until contract expiry.
| Aspect | Old System (Net Metering 2015) | New System (Net Billing 2026) |
|---|---|---|
| Billing Mechanism | 1:1 unit-for-unit exchange | Two separate rates for import & export |
| Export (Sell) Rate | Same as retail purchase rate (~Rs. 22–27/unit) | National Average Energy Purchase Price (NAEPP) — approx. Rs. 10–11/unit |
| Import (Buy) Rate | Standard MEPCO tariff | Standard MEPCO tariff (Rs. 45–60/unit depending on slab) |
| Settlement | Adjusted monthly against bill | Surplus units settled/paid quarterly |
| Contract Duration | Long-term (up to 7 years under later revisions) | Capped at 5 years, renewable for another 5-year term |
| Applicability | Existing contracts largely protected/honoured till expiry | Applies to new applications only |
Note: Following intervention at the federal level, NEPRA confirmed on February 16, 2026 that existing net metering agreements remain valid until their original expiry date and continue under the old unit-for-unit basis — only new connections fall under Net Billing.
Why the Policy Changed
- Rooftop solar capacity in Pakistan crossed 6,000 MW, growing rapidly under the old 1:1 model.
- DISCOs (including MEPCO) reported rising financial losses from buying back solar units at full retail rates.
- Grid stability concerns emerged during peak solar generation hours.
- NEPRA introduced Net Billing to make buyback rates reflect the actual average cost of power generation, rather than the retail tariff.
MEPCO Net Metering — Eligibility Criteria
| Requirement | Detail |
|---|---|
| Connection Type | Residential, commercial, industrial, or agricultural (tube well) with active MEPCO connection |
| Phase Requirement | Three-phase connection generally required |
| System Size | Minimum 1 kW; must not exceed 1.5x sanctioned load |
| Sanctioned Load | Must be equal to or greater than solar system capacity |
| Dues | All previous MEPCO electricity dues must be cleared |
| Metering Hardware | NEPRA/PEPCO-approved bi-directional (smart) meter |
| Installer | AEDB-certified solar installer recommended/required |
| Safety Standard | Inverter must have anti-islanding protection (UL 1741 / IEC 62116) |
Rate Comparison (Approximate, 2026)
| Item | Old Net Metering | New Net Billing |
|---|---|---|
| Buy-back (export) rate | Rs. 22–27 / unit | Rs. 10–11 / unit |
| Purchase (import) rate | Rs. 37–55 / unit (slab-based) | Rs. 45–60 / unit (slab-based) |
| Net Effect | Oversized systems remained financially attractive | Oversizing is less beneficial — best to size system close to actual consumption |
Rates vary by consumer category and slab; always confirm current tariff via MEPCO or NEPRA’s official notification.
MEPCO Net Metering Application Process
- Submit Application — Apply through MEPCO’s online portal or your local sub-division office with CNIC, electricity bill, and property documents.
- Technical Feasibility Study — MEPCO reviews sanctioned load, wiring, and grid capacity.
- Demand Notice & Payment — Pay applicable fee for the bi-directional meter and connection charges.
- Solar System Installation — Installed by an AEDB-certified installer as per NEPRA technical standards.
- Inspection — MEPCO inspects the installation for safety and compliance.
- NOC (No Objection Certificate) — Issued after Punjab Energy Department clearance confirming compliance with SRO 892(I)/2015 and related regulations.
- Power Purchase Agreement (PPA) — Signed between the consumer (now a “prosumer”) and MEPCO.
- Bi-Directional Meter Installation — Final step; meter starts recording imported vs exported units.
Common Issues Faced by MEPCO Net Metering Consumers
- Application processing delays
- Bi-directional meter installation backlog
- Billing mismatches between imported/exported units
- Confusion between old vs new contract terms after the 2026 policy shift
Quick FAQs
Is net metering with MEPCO legal? Yes — it is fully regulated by NEPRA, and MEPCO operates under NEPRA’s official framework.
Will my existing net metering agreement change? No — contracts signed under the 2015 regulations remain valid on their original 1:1 terms until expiry.
What is the minimum/maximum system size for MEPCO net metering? Minimum 1 kW; maximum limited by sanctioned load (MEPCO processes up to 1 MW under the NEPRA Generation Licence Exemption framework).
How is surplus electricity paid under Net Billing? On a quarterly basis, at the National Average Energy Purchase Price, rather than monthly bill adjustment.
Where can I apply or get more information? Through your nearest MEPCO sub-division office or the MEPCO online portal; helpline for general queries is available via MEPCO customer service.
Disclaimer: Rates, timelines, and procedures are subject to change per NEPRA notifications. Always verify current details with your local MEPCO office or NEPRA’s official website before making investment decisions.
MEPCO Electricity Bills: Complete Guide 2026
Everything MEPCO (Multan Electric Power Company) consumers need to know — tariff slabs, bill components, how to check and pay your bill, and tips to reduce your monthly cost.
About MEPCO
MEPCO (Multan Electric Power Company) is the electricity distribution company serving South Punjab, including Multan, Bahawalpur, Sahiwal, DG Khan, Vehari, Khanewal, Lodhran, Muzaffargarh, Layyah, Rajanpur, and Bahawalnagar. Electricity rates for MEPCO are set by NEPRA (National Electric Power Regulatory Authority) under the Government of Pakistan.
MEPCO Residential Tariff Slabs (2026)
| Consumer Category | Monthly Usage | Approx. Rate per Unit |
|---|---|---|
| Protected Consumer | Up to 200 units/month | Rs. 5 – 14 / unit |
| Non-Protected Consumer | Above 200 units/month | Rs. 23 – 68 / unit (slab-based) |
Important: If a “Protected” consumer crosses 200 units even once in a billing month, MEPCO reclassifies the entire month’s consumption under Non-Protected slab rates — not just the extra units. This is one of the most common reasons for a suddenly high bill.
Commercial, industrial, and agricultural (tube well) consumers have separate tariff categories (e.g., A-1, B, C, E series) with their own minimum monthly charges — some categories carry a minimum bill even with zero consumption.
What’s Included in a MEPCO Bill
A typical MEPCO bill has around 9–11 line items:
| Component | Description |
|---|---|
| Energy Charges | Units consumed × applicable slab rate |
| Fixed/Customer Charges | Flat monthly charge, applies regardless of usage in some categories |
| FPA (Fuel Price Adjustment) | Variable monthly charge reflecting fuel cost used for generation; can be positive or negative |
| QTA (Quarterly Tariff Adjustment) | Periodic adjustment reviewed by NEPRA every quarter |
| GST | 17% General Sales Tax |
| Electricity Duty | 1.5%, collected by the provincial government |
| NJ Surcharge | Additional regulatory surcharge (~10%) |
| TV License Fee (PTV Fee) | Fixed Rs. 35/month |
| Meter Rent | Small fixed charge for meter maintenance |
| Arrears / Deferred Amount | Any unpaid previous balance or postponed installment |
How to Check Your MEPCO Bill Online
You’ll need either your 14-digit Reference Number or 10-digit Customer ID, both printed on any previous bill.
- Visit MEPCO’s online bill portal (or an authorized bill-checking service).
- Enter your Reference Number or Customer ID.
- View your bill amount, due date, consumer name, address, and consumption details.
- Download or print the PDF — it’s accepted as a legally valid duplicate copy.
Check via SMS (no internet needed): Send PITC <space> <14-digit reference number> to 8334. You’ll receive the bill amount and due date within seconds.
SMS reminders: Register the same way to get an automatic alert ~10 days before your due date.
How to Pay Your MEPCO Bill
| Method | How |
|---|---|
| Mobile Wallets (Easypaisa, JazzCash, NayaPay, SadaPay) | Open app → Bill Payment → Electricity → MEPCO → enter reference number → confirm |
| Mobile/Internet Banking (HBL, UBL, MCB, Meezan, Allied, etc.) | Log in → Bill Payments/Utility → select MEPCO → enter reference number → pay |
| ATM | Insert card → Bill Payments → MEPCO → enter reference number → follow prompts |
| Bank Branch / Post Office | Present original or duplicate bill at the counter and pay in cash |
Tip: Always save your transaction ID/screenshot. If a payment shows “pending” for more than 24 hours, contact your bank with this reference for follow-up.
Due Date Extensions
- Bill amount under Rs. 100,000 → can request a 3-day extension
- Bill amount over Rs. 100,000 → can request a 5-day extension
Extensions are typically requested through your nearest MEPCO sub-divisional office.
Peak Hours & Their Effect on Your Bill
Bills are higher when consumption happens during peak hours (typically 6 PM–10 PM, shifting to 5 PM–9 PM in winter for TOU/TOD meter consumers). See our detailed [MEPCO Peak Hours guide] for the full seasonal breakdown and rate comparison.
Common Reasons for a High MEPCO Bill
- Crossing 200 units and losing “Protected” status for the whole month
- Running heavy appliances (AC, iron, water heater) during peak hours
- FPA/QTA increases passed on by NEPRA that particular quarter
- Meter reading errors or estimated (not actual) readings
- Unpaid arrears carried forward from a previous bill
Tips to Reduce Your MEPCO Bill
- Track usage regularly and try to stay within the 200-unit protected slab if you’re close to the line.
- Shift heavy appliance use (AC, washing machine, iron) outside peak hours.
- Use energy-efficient LED bulbs and inverter appliances.
- Consider net metering/solar if usage is consistently high (see our MEPCO Net Metering guide).
- Check your bill every month for reading errors or incorrect slab classification.
Quick FAQs
What is the 200-unit rule? Residential consumers using 200 units or less per month qualify as “Protected” and get lower slab rates. Exceeding 200 units in any month shifts the entire month’s bill to Non-Protected rates.
What is FPA on my bill? Fuel Price Adjustment — a variable monthly charge based on the fuel cost of electricity generation that month, set by NEPRA.
Can I check my bill without the internet? Yes, via SMS: send PITC <reference number> to 8334.
How do I get a duplicate bill copy? Enter your 14-digit reference number on MEPCO’s online portal and download the PDF — it’s valid for official use.
Does MEPCO use the same tariff as other DISCOs (LESCO, FESCO, etc.)? Yes, residential tariff slabs are set nationally by NEPRA, so base rates are generally consistent across DISCOs, though local surcharges can vary slightly.
Disclaimer: Tariff rates, taxes, and charges are set and periodically revised by NEPRA and are subject to change. Figures in this guide are approximate and for informational purposes — always confirm exact rates and charges via your official MEPCO bill or NEPRA’s website.
MEPCO Electricity Bills — FAQs (2026)
Q1: What is the 200-unit “Protected Consumer” rule? Residential consumers who use 200 units or less in a month are classified as “Protected” and billed at lower, subsidized slab rates. If usage crosses 200 units even once, the entire month’s consumption is billed at the higher Non-Protected rates — not just the extra units.
Q2: Why is my MEPCO bill suddenly so high this month? Common reasons include: crossing the 200-unit threshold and losing Protected status, running heavy appliances (AC, iron, water heater) during peak hours, a NEPRA-approved FPA or quarterly tariff increase, an estimated (not actual) meter reading, or arrears carried over from a previous unpaid bill.
Q3: What is FPA on my MEPCO bill? FPA stands for Fuel Price Adjustment — a variable monthly charge that reflects the actual cost of fuel used to generate electricity that month. It’s set by NEPRA and can increase or decrease your bill depending on the energy mix.
Q4: What is QTA (Quarterly Tariff Adjustment)? QTA is a periodic adjustment NEPRA applies every quarter to account for changes in the overall cost of electricity generation and distribution across the country.
Q5: What taxes and surcharges appear on a MEPCO bill? Typically: 17% GST, 1.5% Electricity Duty, an NJ Surcharge (~10%), and a fixed Rs. 35 TV License (PTV) fee, in addition to energy charges, fixed/customer charges, FPA, and QTA.
Q6: How can I check my MEPCO bill online? Enter your 14-digit Reference Number or 10-digit Customer ID on MEPCO’s online bill portal to view your bill amount, due date, and consumption details, and download a PDF copy.
Q7: Can I check my bill without internet access? Yes. Send PITC <space> <your 14-digit reference number> as an SMS to 8334 to get your bill amount and due date instantly.
Q8: How do I get a duplicate copy of my MEPCO bill? Enter your reference number on the MEPCO online portal and download the PDF — it’s accepted as a legally valid duplicate, identical to the original printed bill.
Q9: What are the easiest ways to pay my MEPCO bill? Mobile wallets (Easypaisa, JazzCash, NayaPay, SadaPay), mobile/internet banking apps (HBL, UBL, MCB, Meezan, Allied, etc.), ATMs, or in person at any bank branch or post office.
Q10: Can I get an extension on my due date? Yes. Bills under Rs. 100,000 are generally eligible for a 3-day extension, and bills over Rs. 100,000 for a 5-day extension. Extensions are requested through your nearest MEPCO sub-divisional office.
Q11: Do peak hours affect my MEPCO bill? Yes. Electricity used during peak hours (typically 6 PM–10 PM, or 5 PM–9 PM in winter) is billed at a significantly higher rate for TOU/TOD meter consumers. Shifting heavy appliance use to off-peak hours can noticeably lower your bill.
Q12: Does MEPCO charge the same tariff as LESCO, FESCO, or other DISCOs? Residential tariff slabs are set nationally by NEPRA, so base rates are broadly the same across DISCOs, though small differences in local surcharges may apply.
Q13: What happens if I don’t pay my MEPCO bill on time? A late payment surcharge is added, and your unpaid amount carries forward as arrears on the next bill. Continued non-payment can eventually lead to disconnection.
Q14: How can I reduce my monthly MEPCO bill? Stay within the 200-unit protected slab where possible, avoid heavy appliance use during peak hours, switch to energy-efficient LED lighting and inverter appliances, check your bill monthly for errors, and consider net metering/solar if your usage is consistently high.
Q15: Who regulates MEPCO’s electricity rates? NEPRA (National Electric Power Regulatory Authority), under the Government of Pakistan, approves and revises all MEPCO tariff rates, slabs, and periodic adjustments.
Disclaimer: Rates, charges, and procedures mentioned above are subject to change per NEPRA notifications. Always verify current details via your official MEPCO bill or NEPRA’s website.